WiFi в 851w

version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Cisco
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
ip subnet-zero
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
domain-name Contact23
dns-server 8.8.8.8
lease 0 2
!
ip dhcp pool WLAN
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
!
!
ip cef
ip domain name yourdomain.com
ip name-server 192.168.81.1
ip name-server 8.8.8.8
!
!
crypto pki trustpoint TP-self-signed-708928757
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-708928757
revocation-check none
rsakeypair TP-self-signed-708928757
!
!
crypto pki certificate chain TP-self-signed-708928757
certificate self-signed 01 nvram:IOS-Self-Sig#370D.cer
username cisco privilege 15 secret 5 $1$uhgB$2ZS3J.GYDAMyV3sSFCei61
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
ip address 192.168.81.81 255.255.255.0
ip mtu 1440
ip nat outside
ip nat enable
ip virtual-reassembly
ip tcp adjust-mss 1400
duplex auto
speed auto
!
interface Dot11Radio0
no ip address
!
ssid Contact-Store
vlan 1
authentication open
guest-mode
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.81.1
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list NAT interface FastEthernet4 overload
ip dns server
!
ip access-list extended NAT
permit ip 10.10.10.0 0.0.0.255 any
!
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
!
control-plane
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------

Cisco Router and Security Device Manager (SDM) is installed on this device and
it provides the default username "cisco" for one-time use. If you have already
used the username "cisco" to login to the router and your IOS image supports the
"one-time" user option, then this username has already expired. You will not be
able to login to the router with this username after you exit this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
password 7 0650597718175F4F53
login
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end