Восстановление прошивки Juniper SRX650

loader> install file:///junos12.147D30.tgz
Target device selected for installation: internal media
/kernel data=0xb177d8+0x134cf0 syms=[0x4+0x8bc90+0x4+0xcb015]
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 2048 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2015, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1X47-D30.4 #0: 2015-11-13 14:16:02 UTC
builder@greteth.juniper.net:/volume/build/junos/12.1/service/12.1X47-D30.4/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X47-D30.4 #0: 2015-11-13 14:16:02 UTC
builder@greteth.juniper.net:/volume/build/junos/12.1/service/12.1X47-D30.4/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 2147483648 (2048MB)
avail memory = 1040240640 (992MB)
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 12 to 1
cpu0 on motherboard
: CAVIUM's OCTEON 56XX CPU Rev. 0.9 with no FPU implemented
L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
L2 Cache: Size 2048kb, 8 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 4 ports with 4 removable, self powered
umass0: Generic USB Storage, rev 2.00/94.51, addr 3
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 4 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 4 lanes
pcib0: Initialized controller
pci0: <PCI bus> on pcib0
pcib2: <PCI-PCI bridge> irq 0 at device 0.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 0 at device 1.0 on pci1
pci2: <PCI bus> on pcib3
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <PCI-PCI bridge> irq 0 at device 2.0 on pci1
pci3: <PCI bus> on pcib4
atapci0: <SiI 3132 SATA300 controller> mem 0x100000-0x10007f,0x104000-0x107fff irq 0 at device 0.0 on pci3
unknown: Allocating IRQ for intpin 1, device atapci failed, i2cid
pcib0: Allocating IRQ for atapci failed
atapci0: unable to map interrupt
device_attach: atapci0 attach returned 6
pcib5: <PCI-PCI bridge> irq 0 at device 3.0 on pci1
pci4: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> mem 0x200000-0x21ffff irq 0 at device 0.0 on pci4
pci5: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> irq 0 at device 1.0 on pci5
pci6: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> irq 0 at device 2.0 on pci5
pci7: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> irq 0 at device 3.0 on pci5
pci8: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> irq 0 at device 4.0 on pci5
pci9: <PCI bus> on pcib10
pcib11: <PCI-PCI bridge> irq 0 at device 5.0 on pci5
pci10: <PCI bus> on pcib11
pcib12: <PCI-PCI bridge> irq 0 at device 6.0 on pci5
pci11: <PCI bus> on pcib12
pcib13: <PCI-PCI bridge> irq 0 at device 7.0 on pci5
pci12: <PCI bus> on pcib13
pcib14: <PCI-PCI bridge> irq 0 at device 4.0 on pci1
pci13: <PCI bus> on pcib14
pcib1: <Cavium on-chip PCIe HOST bridge> on obio0
pci14: <PCI bus> on pcib1
pci14: <processor> at device 0.0 (no driver attached)
CompactFlash model TS2GCF133
ata0: <Octeon Compact Flash Driver> on obio0
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 8MB> on obio0
Timecounter "mips" frequency 700000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </isofs-install-srxsme> 10022912 bytes at 0x80ea3178
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic STORAGE DEVICE 9451> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3724MB (7626752 512 byte sectors: 255H 63S/T 474C)
Trying to mount root from cd9660:/dev/md0
WARNING: preposterous time in file system
WARNING: clock 4566 days greater than file system time
tty: not found
Starting JUNOS installation:
Source Package: disk0:/junos12.147D30.tgz
Target Media : internal
Product : srx650
Computing slice and partition sizes for /dev/ad0 ...
Attempting to save existing configuration...
Could not find any existing configuration.
Formatting target media /dev/ad0 ...
Preparing to create slices on /dev/ad0
/dev/ad0: 3915072 sectors [C:3884 H:16 S:63 SS:512]
Shrinking slice 1 by 144 blocks for alignment
Shrinking slice 2 by 112 blocks for alignment
Shrinking slice 3 by 608 blocks for alignment
1+0 records in
1+0 records out
512 bytes transferred in 0.000329 secs (1556148 bytes/sec)
Creating slices:
g c3884 h16 s63
p 1 0xA5 2048 1232752
p 2 0xA5 1234800 1232784
p 3 0xA5 2467584 1328544
p 4 0xA5 3796128 118944
a 1
******* Working on device /dev/ad0 *******
fdisk: WARNING line 1: number of cylinders (3884) may be out-of-range
(must be within 1-1024 for normal BIOS operation, unless the entire disk
is dedicated to FreeBSD)
fdisk: WARNING: adjusting start offset of partition 1
from 2048 to 2079, to fall on a head boundary
fdisk: WARNING: adjusting size of partition 1 from 1232752 to 1232721
to end on a cylinder boundary
Computing layout of partitions in /dev/ad0s1...
Shrinking partition a by 945 blocks for alignment
Labeling /dev/ad0s1:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/ad0s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 1229728 2048 unused 0 0
c: 1232721 0 unused 0 0 # "raw" part, don't edit
/dev/ad0s1a: 600.5MB (1229724 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 150.12MB, 9608 blks, 19328 inodes.
super-block backups (for fsck -b #) at:
32, 307488, 614944, 922400
cpuid = 0
ADDRESS_ERR: pid 132 (ln), uid 0: pc 0x284478b4 got a write fault at 0x8102db38
Trapframe Register Dump:
zero: 0000000000000000 at: 0000000000000000 v0: ffffffff8102db38 v1: ffffffff8102db38
a0: 000000003ffedc18 a1: 000000003ffedd80 a2: 000000003ffedd80 a3: 0000000000000000
t0: 000000003ffedd80 t1: 0000000000000000 t2: 0000000028446e44 t3: 000000003ffede88
ta0: 0000000000000011 ta1: 000000007000000a ta2: 0000000000000003 ta3: 00000000284b3750
t8: 000000000000000a t9: 0000000028447860 s0: 0000000000000001 s1: 000000003ffedd80
s2: 0000000000000001 s3: 00000000000000c3 s4: 0000000000000000 s5: 00000000284460cc
s6: 00000000284460cc s7: 000000000640a965 k0: 0000000000000000 k1: 0000000000000000
gp: 00000000284bb740 sp: ffffffff8102db20 s8: 000000003ffedbf8 ra: 0000000028448748
sr: 0000000050808cf3 mullo: 0000000000000000 mulhi: 0000000000000000
pc: 00000000284478b4 cause: 0000000000000014 badvaddr: ffffffff8102db38
Page table info for pc address 0x284478b4: pte = 0x400ea21a
Dumping 4 words starting at pc address 0x284478b4:
ac650000 24e20001 ac820008 03e00008
pid 132 (ln), uid (0): Path `ln.core.0.gz' failed on initial open test, error = 30
BERROR: Failed to create symlink /dev/bo0s1a for /dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done

syncing disks... All buffers synced.
Uptime: 19s
Resetting all PIMs
Rebooting...
cpu_reset: Stopping other CPUs


U-Boot 1.1.6-JNPR-2.8 (Build time: Feb 10 2015 - 01:03:41)

Initializing memory this may take some time...
Measured DDR clock 333.28 MHz
SRX_650 board revision major:0, minor:10, serial #: AADT8238
OCTEON CN5650-SCP pass 2.1, Core clock: 700 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM: 2048 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 8 MB
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Clearing DRAM........ done
Fuse: 0x0fff, Coremask: 0x0fff
BIST check passed.
PCIe: Initializing port 0
Boot Media: usb internal-compact-flash external-compact-flash
Net: octeth0, octeth1, octeth2, octeth3
Enabling internal compact flash...

ide 0: Model: TS2GCF133 Firm: 20171204 Ser#: E258490207626C1E0173
Type: Removable Hard Disk
Capacity: 1911.6 MB = 1.8 GB (3915072 x 512)
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f0000a0 (246560 bytes)
Loading .rodata @ 0x8f03c3c0 (14144 bytes)
Loading .reginfo @ 0x8f03fb00 (24 bytes)
Loading .rodata.str1.4 @ 0x8f03fb18 (16516 bytes)
Loading set_Xcommand_set @ 0x8f043b9c (96 bytes)
Loading .rodata.cst4 @ 0x8f043bfc (20 bytes)
Loading .data @ 0x8f044000 (5760 bytes)
Loading .data.rel.ro @ 0x8f045680 (120 bytes)
Loading .data.rel @ 0x8f0456f8 (136 bytes)
Clearing .bss @ 0x8f045780 (11600 bytes)
## Starting application at 0x8f0000a0 ...
Consoles: U-Boot console
Found compatible API, ver. 2.8

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.8
(slt-builder@svl-ssd-build-vm06.juniper.net, Tue Feb 10 00:32:30 PST 2015)
Memory: 2048MB
[5]Booting from internal-compact-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
\
can't load '/kernel'
can't load '/kernel.old'
Press Enter to stop auto bootsequencing and to enter loader prompt.

loader> install file:///junos12.147D30.tgz
Target device selected for installation: internal media
/kernel data=0xb177d8+0x134cf0 syms=[0x4+0x8bc90+0x4+0xcb015]
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 2048 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2015, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1X47-D30.4 #0: 2015-11-13 14:16:02 UTC
builder@greteth.juniper.net:/volume/build/junos/12.1/service/12.1X47-D30.4/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X47-D30.4 #0: 2015-11-13 14:16:02 UTC
builder@greteth.juniper.net:/volume/build/junos/12.1/service/12.1X47-D30.4/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 2147483648 (2048MB)
avail memory = 1040240640 (992MB)
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 12 to 1
cpu0 on motherboard
: CAVIUM's OCTEON 56XX CPU Rev. 0.9 with no FPU implemented
L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
L2 Cache: Size 2048kb, 8 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 4 ports with 4 removable, self powered
umass0: Generic USB Storage, rev 2.00/94.51, addr 3
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 4 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 4 lanes
pcib0: Initialized controller
pci0: <PCI bus> on pcib0
pcib2: <PCI-PCI bridge> irq 0 at device 0.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> irq 0 at device 1.0 on pci1
pci2: <PCI bus> on pcib3
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <PCI-PCI bridge> irq 0 at device 2.0 on pci1
pci3: <PCI bus> on pcib4
atapci0: <SiI 3132 SATA300 controller> mem 0x100000-0x10007f,0x104000-0x107fff irq 0 at device 0.0 on pci3
unknown: Allocating IRQ for intpin 1, device atapci failed, i2cid
pcib0: Allocating IRQ for atapci failed
atapci0: unable to map interrupt
device_attach: atapci0 attach returned 6
pcib5: <PCI-PCI bridge> irq 0 at device 3.0 on pci1
pci4: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> mem 0x200000-0x21ffff irq 0 at device 0.0 on pci4
pci5: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> irq 0 at device 1.0 on pci5
pci6: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> irq 0 at device 2.0 on pci5
pci7: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> irq 0 at device 3.0 on pci5
pci8: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> irq 0 at device 4.0 on pci5
pci9: <PCI bus> on pcib10
pcib11: <PCI-PCI bridge> irq 0 at device 5.0 on pci5
pci10: <PCI bus> on pcib11
pcib12: <PCI-PCI bridge> irq 0 at device 6.0 on pci5
pci11: <PCI bus> on pcib12
pcib13: <PCI-PCI bridge> irq 0 at device 7.0 on pci5
pci12: <PCI bus> on pcib13
pcib14: <PCI-PCI bridge> irq 0 at device 4.0 on pci1
pci13: <PCI bus> on pcib14
pcib1: <Cavium on-chip PCIe HOST bridge> on obio0
pci14: <PCI bus> on pcib1
pci14: <processor> at device 0.0 (no driver attached)
CompactFlash model TS2GCF133
ata0: <Octeon Compact Flash Driver> on obio0
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 8MB> on obio0
Timecounter "mips" frequency 700000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </isofs-install-srxsme> 10022912 bytes at 0x80ea3178
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic STORAGE DEVICE 9451> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3724MB (7626752 512 byte sectors: 255H 63S/T 474C)
Trying to mount root from cd9660:/dev/md0
WARNING: preposterous time in file system
WARNING: clock 4569 days greater than file system time
tty: not found
Starting JUNOS installation:
Source Package: disk0:/junos12.147D30.tgz
Target Media : internal
Product : srx650
ERROR: Package /junos12.147D30.tgz was not found on media: /dev/da0s1
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 0 done

syncing disks... All buffers synced.
Uptime: 10s
Resetting all PIMs
Rebooting...
cpu_reset: Stopping other CPUs


U-Boot 1.1.6-JNPR-2.8 (Build time: Feb 10 2015 - 01:03:41)

Initializing memory this may take some time...
Measured DDR clock 333.28 MHz
SRX_650 board revision major:0, minor:10, serial #: AADT8238
OCTEON CN5650-SCP pass 2.1, Core clock: 700 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM: 2048 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 8 MB
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Clearing DRAM........ done
Fuse: 0x0fff, Coremask: 0x0fff
BIST check passed.
PCIe: Initializing port 0
Boot Media: usb internal-compact-flash external-compact-flash
Net: octeth0, octeth1, octeth2, octeth3
Enabling external compact flash...

ide 0: Model: TS2GCF133 Firm: 20110407 Ser#: E76757033453386700A8
Type: Removable Hard Disk
Capacity: 1911.6 MB = 1.8 GB (3915072 x 512)
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f0000a0 (246560 bytes)
Loading .rodata @ 0x8f03c3c0 (14144 bytes)
Loading .reginfo @ 0x8f03fb00 (24 bytes)
Loading .rodata.str1.4 @ 0x8f03fb18 (16516 bytes)
Loading set_Xcommand_set @ 0x8f043b9c (96 bytes)
Loading .rodata.cst4 @ 0x8f043bfc (20 bytes)
Loading .data @ 0x8f044000 (5760 bytes)
Loading .data.rel.ro @ 0x8f045680 (120 bytes)
Loading .data.rel @ 0x8f0456f8 (136 bytes)
Clearing .bss @ 0x8f045780 (11600 bytes)
## Starting application at 0x8f0000a0 ...
Consoles: U-Boot console
Found compatible API, ver. 2.8

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.8
(slt-builder@svl-ssd-build-vm06.juniper.net, Tue Feb 10 00:32:30 PST 2015)
Memory: 2048MB
[15]Booting from usb slice 4
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors

can't load '/kernel'
can't load '/kernel.old'