Cisco air-ap1242ag-a-k9 настройка репитера

Xmodem file system is available.
flashfs[0]: 153 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6022144
flashfs[0]: Bytes available: 9976832
flashfs[0]: flashfs fsck took 28 seconds.
Base ethernet MAC Address: 00:19:e7:14:15:10
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
link auto-negotiating....
auto-negotiation takes 10000 milli-seconds to complete
ERROR: timeout waiting for auto-negotiation to complete
ERROR: fail to bring ethernet link up

The system has been encountered an error initializing
ethernet port. You may need to check hardware
The system is ignoring the error and continuing boot.
If you interrupt the system boot process, the following
commands will reinitialize ethernet, tftp, and finish
loading the operating system software:

ether_init
tftp_init
boot

Loading "flash:/c1240-k9w7-mx.124-25d.JA2/c1240-k9w7-mx.124-25d.JA2"...######### ######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ##############################

File "flash:/c1240-k9w7-mx.124-25d.JA2/c1240-k9w7-mx.124-25d.JA2" uncompressed a nd installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(25d)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 12-Sep-12 01:52 by prod_rel_team


Proceeding with system init

Proceeding to unmask interrupts
Initializing flashfs...

flashfs[1]: 153 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 6022144
flashfs[1]: Bytes available: 9718784
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

Radio0 present A506 7100 E8000000 A0000000 80000000 3
Radio1 present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/expor... stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1242AG-A-K9 (PowerPCElvis) processor (revision A0) with 25590K/71 68K bytes of memory.
Processor board ID FTX1045B7Z1
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:19:E7:14:15:10
Part Number : 73-9925-05
PCA Assembly Number : 800-26579-04
PCA Revision Number : B0
PCB Serial Number : FOC10414GR8
Top Assembly Part Number : 800-26804-02
Top Assembly Serial Number : FTX1045B7Z1
Top Revision Number : B0
Product/Model Number : AIR-AP1242AG-A-K9



Press RETURN to get started!


*Mar 1 00:00:05.348: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.976: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:08.574: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:10.765: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.765: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Apr 17 12:03:30.001: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Apr 17 12:03:30.001: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Apr 17 12:03:30.003: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Apr 17 12:03:30.033: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(25d)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 12-Sep-12 01:52 by prod_rel_team
*Apr 17 12:03:30.034: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Apr 17 12:03:30.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Apr 17 12:03:31.001: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Apr 17 12:03:31.001: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio 0, changed state to down
*Apr 17 12:03:41.879: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Apr 17 12:03:42.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down

Добавлено через 57 секунд
Как отконфигурировать точку?