Помогите настроить GPRS

Vourhey@linux-ezd5:~> hcitool scan
Scanning ...
    00:1F:DE:95:06:3D   Vourhey
Vourhey@linux-ezd5:~> l2ping 00:1F:DE:95:06:3D
Can't create socket: Operation not permitted
Vourhey@linux-ezd5:~> su
Password: 
linux-ezd5:/home/Vourhey # l2ping 00:1F:DE:95:06:3D
Ping: 00:1F:DE:95:06:3D from 00:11:67:00:00:00 (data size 44) ...
0 bytes from 00:1F:DE:95:06:3D id 0 time 31.85ms
0 bytes from 00:1F:DE:95:06:3D id 1 time 41.75ms
0 bytes from 00:1F:DE:95:06:3D id 2 time 40.79ms
^C3 sent, 3 received, 0% loss
linux-ezd5:/home/Vourhey # rfcomm bind rfcomm0 00:1F:DE:95:06:3D 1
linux-ezd5:/home/Vourhey # vim /etc/bluetooth/
hcid.conf    rfcomm.conf  
linux-ezd5:/home/Vourhey # vim /etc/bluetooth/hcid.conf 
linux-ezd5:/home/Vourhey # vim /etc/bluetooth/rfcomm.conf 
linux-ezd5:/home/Vourhey # cat /etc/bluetooth/hcid.conf
#
# HCI daemon configuration file.
#
# don't change stuff here, use the DBus methods instead.
#
 
# HCId options
options {
    # Automatically initialize new devices
    autoinit yes;
 
    # Security Manager mode
    #   none - Security manager disabled
    #   auto - Use local PIN for incoming connections
    #   user - Always ask user for a PIN
    #
    security user;
 
    # Pairing mode
    #   none  - Pairing disabled
    #   multi - Allow pairing with already paired devices
    #   once  - Pair once and deny successive attempts
    pairing multi;
 
    # Default PIN code for incoming connections
    passkey "BlueZ";
}
 
# Default settings for HCI devices
device {
    # Local device name
    #   %d - device id
    #   %h - host name
    name "BlueZ %h (%d)";
 
    # Local device class
    class 0x000100;
 
    # Default packet type
    #pkt_type DH1,DM1,HV1;
 
    # Inquiry and Page scan
    # valid parameters: enable | disable
    iscan enable;
    pscan enable;
 
    # Default link mode
    #   none   - no specific policy 
    #   accept - always accept incoming connections
    #   master - become master on incoming connections,
    #            deny role switch on outgoing connections
    lm accept, master;
 
    # Default link policy
    #   none    - no specific policy
    #   rswitch - allow role switch
    #   hold    - allow hold mode
    #   sniff   - allow sniff mode
    #   park    - allow park mode
    lp rswitch,hold,sniff,park;
}
linux-ezd5:/home/Vourhey # cat /etc/bluetooth/rfcomm.conf
#
# RFCOMM configuration file.
#
 
rfcomm0 {
#   # Automatically bind the device at startup
    bind yes;
#
#   # Bluetooth address of the device
    device 00:1F:DE:95:06:3D;
#
#   # RFCOMM channel for the connection
    channel 1;
#
#   # Description of the connection
    comment "My Bluetooth device :)";
}
linux-ezd5:/home/Vourhey # vim /etc/wvdial.conf
linux-ezd5:/home/Vourhey # cat /etc/wvdial.conf 
 
[Dialer Defaults]
Modem = /dev/rfcomm0
Baud = 57600
Init1 = AT+CGDCONT=1,"IP","internet.tele2.ru"
Init2 = 
Init3 =
Area Code =
Phone = *99***1#
Username = tele2
Password = tele2
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
linux-ezd5:/home/Vourhey # wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: AT+CGDCONT=1,"IP","internet.tele2.ru"
AT+CGDCONT=1,"IP","internet.tele2.ru"
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sat Nov 29 05:54:40 2008
--> Pid of pppd: 15131
--> Using interface ppp0
--> pppd: (�[06][08]
--> pppd: (�[06][08]
--> pppd: (�[06][08]
--> local  IP address 90.139.97.122
--> pppd: (�[06][08]
--> remote IP address 10.6.6.6
--> pppd: (�[06][08]
--> primary   DNS address 130.244.127.161
--> pppd: (�[06][08]
--> secondary DNS address 130.244.127.169
--> pppd: (�[06][08]
--> Script /etc/ppp/ip-up run successful
--> Default route Ok.
--> Nameserver (DNS) Ok.
--> Connected... Press Ctrl-C to disconnect