WinExec

@cyberkest · Регистрация: 05.05.2008

Студворк — интернет-сервис помощи студентам

Подкажите где я туплю

"ShowMessage("333");
WinExec("c:\\myyprog\\debug\\1.bat",SW_S HOW);"
Сообщение вижу, а вот файл 1.bat выполняется с ошибками(хотя если его просто запустить ручками из виндовс то всё нормально разархивируется).
внутри 1.bat написано:
@echo off
7za.exe e -y tmp.7z
exit
Я уже и так и так колдовал и пытался одной строкой просто запустить разархивацию в WinExec, а всё равно лагает!
в чем может быть проблема?

@mikityak · 14.06.2008, 11:15

WinExec("C:\WINDOWS\system32\Cmd.exe c:\\myyprog\\debug\\1.bat",SW_SHOW);"

)

юзай ShellExecute

@cyberkest · 14.06.2008, 11:29 **[ТС]**

Сообщение от mikityak

WinExec("C:\WINDOWS\system32\Cmd.exe c:\\myyprog\\debug\\1.bat",SW_SHOW);"

)

юзай ShellExecute

а может всё-таки вот так????: WinExec("C:\\WINDOWS\\system32\\Cmd.exe c:\\myyprog\\debug\\1.bat",SW_SHOW);

Но пока всё равно ни то ни то не работает!

@mikityak · 14.06.2008, 11:37

ShellExecute Function

--------------------------------------------------------------------------------

Performs an operation on a specified file.

Syntax

HINSTANCE ShellExecute( HWND hwnd,
LPCTSTR lpOperation,
LPCTSTR lpFile,
LPCTSTR lpParameters,
LPCTSTR lpDirectory,
INT nShowCmd
);
Parameters

hwnd
[in] Handle to the owner window used for displaying a user interface (UI) or error messages. This value can be NULL if the operation is not associated with a window.
lpOperation
[in] Pointer to a null-terminated string, referred to in this case as a verb, that specifies the action to be performed. The set of available verbs depends on the particular file or folder. Generally, the actions available from an object's shortcut menu are available verbs. For more information about verbs and their availability, see Object Verbs. See Extending Shortcut Menus for further discussion of shortcut menus. The following verbs are commonly used.
edit
Launches an editor and opens the document for editing. If lpFile is not a document file, the function will fail.
explore
Explores the folder specified by lpFile.
find
Initiates a search starting from the specified directory.
open
Opens the file specified by the lpFile parameter. The file can be an executable file, a document file, or a folder.
print
Prints the document file specified by lpFile. If lpFile is not a document file, the function will fail.
NULL
For systems prior to Microsoft Windows 2000, the default verb is used if it is valid and available in the registry. If not, the "open" verb is used.

For Windows 2000 and later systems, the default verb is used if available. If not, the "open" verb is used. If neither verb is available, the system uses the first verb listed in the registry.

lpFile
[in] Pointer to a null-terminated string that specifies the file or object on which to execute the specified verb. To specify a Shell namespace object, pass the fully qualified parse name. Note that not all verbs are supported on all objects. For example, not all document types support the "print" verb.
lpParameters
[in] If the lpFile parameter specifies an executable file, lpParameters is a pointer to a null-terminated string that specifies the parameters to be passed to the application. The format of this string is determined by the verb that is to be invoked. If lpFile specifies a document file, lpParameters should be NULL.
lpDirectory
[in] Pointer to a null-terminated string that specifies the default directory.
nShowCmd
[in] Flags that specify how an application is to be displayed when it is opened. If lpFile specifies a document file, the flag is simply passed to the associated application. It is up to the application to decide how to handle it.
SW_HIDE
Hides the window and activates another window.
SW_MAXIMIZE
Maximizes the specified window.
SW_MINIMIZE
Minimizes the specified window and activates the next top-level window in the z-order.
SW_RESTORE
Activates and displays the window. If the window is minimized or maximized, Windows restores it to its original size and position. An application should specify this flag when restoring a minimized window.
SW_SHOW
Activates the window and displays it in its current size and position.
SW_SHOWDEFAULT
Sets the show state based on the SW_ flag specified in the STARTUPINFO structure passed to the CreateProcess function by the program that started the application. An application should call ShowWindow with this flag to set the initial show state of its main window.
SW_SHOWMAXIMIZED
Activates the window and displays it as a maximized window.
SW_SHOWMINIMIZED
Activates the window and displays it as a minimized window.
SW_SHOWMINNOACTIVE
Displays the window as a minimized window. The active window remains active.
SW_SHOWNA
Displays the window in its current state. The active window remains active.
SW_SHOWNOACTIVATE
Displays a window in its most recent size and position. The active window remains active.
SW_SHOWNORMAL
Activates and displays a window. If the window is minimized or maximized, Windows restores it to its original size and position. An application should specify this flag when displaying the window for the first time.
Return Value

Returns a value greater than 32 if successful, or an error value that is less than or equal to 32 otherwise. The following table lists the error values. The return value is cast as an HINSTANCE for backward compatibility with 16-bit Windows applications. It is not a true HINSTANCE, however. The only thing that can be done with the returned HINSTANCE is to cast it to an int and compare it with the value 32 or one of the error codes below.

0 The operating system is out of memory or resources.
ERROR_FILE_NOT_FOUND The specified file was not found.
ERROR_PATH_NOT_FOUND The specified path was not found.
ERROR_BAD_FORMAT The .exe file is invalid (non-Microsoft Win32 .exe or error in .exe image).
SE_ERR_ACCESSDENIED The operating system denied access to the specified file.
SE_ERR_ASSOCINCOMPLETE The file name association is incomplete or invalid.
SE_ERR_DDEBUSY The Dynamic Data Exchange (DDE) transaction could not be completed because other DDE transactions were being processed.
SE_ERR_DDEFAIL The DDE transaction failed.
SE_ERR_DDETIMEOUT The DDE transaction could not be completed because the request timed out.
SE_ERR_DLLNOTFOUND The specified dynamic-link library (DLL) was not found.
SE_ERR_FNF The specified file was not found.
SE_ERR_NOASSOC There is no application associated with the given file name extension. This error will also be returned if you attempt to print a file that is not printable.
SE_ERR_OOM There was not enough memory to complete the operation.
SE_ERR_PNF The specified path was not found.
SE_ERR_SHARE A sharing violation occurred.

Remarks

This method allows you to execute any commands in a folder's shortcut menu or stored in the registry.

To open a folder, use either of the following calls:

ShellExecute(handle, NULL, <fully_qualified_path_to_folder>, NULL, NULL, SW_SHOWNORMAL);

or

ShellExecute(handle, "open", <fully_qualified_path_to_folder>, NULL, NULL, SW_SHOWNORMAL);

To explore a folder, use:

ShellExecute(handle, "explore", <fully_qualified_path_to_folder>, NULL, NULL, SW_SHOWNORMAL);

To launch the Shell's Find utility for a directory, use:

ShellExecute(handle, "find", <fully_qualified_path_to_folder>, NULL, NULL, 0);

If lpOperation is NULL, the function opens the file specified by lpFile. If lpOperation is "open" or "explore", the function attempts to open or explore the folder.

To obtain information about the application that is launched as a result of calling ShellExecute, use ShellExecuteEx.

Note The Launch folder windows in a separate process setting in Folder Options affects ShellExecute. If that option is disabled (the default setting), ShellExecute uses an open Explorer window rather than launch a new one. If no Explorer window is open, ShellExecute launches a new one.
Windows 95/98/Me: ShellExecute is supported by the Microsoft Layer for Unicode. To use this, you must add certain files to your application, as outlined in Microsoft Layer for Unicode on Windows 95/98/Me Systems.

Function Information

Minimum DLL Version shell32.dll version 3.51 or later
Custom Implementation No
Header shellapi.h
Import library shell32.lib
Minimum operating systems Windows NT 3.1, Windows 95
Unicode Implemented as ANSI and Unicode versions.

See Also

IShellExecuteHook

--------------------------------------------------------------------------------

© 2005 Microsoft Corporation. All rights reserved.

@cyberkest · 14.06.2008, 11:42 **[ТС]**

Т.Е. вот так ??
ShellExecute(Handle, NULL, "C:\\WINDOWS\\system32\\Cmd.exe", "c:\\myprog\\debug\\1.bat", NULL, SW_RESTORE);

@mikityak · 14.06.2008, 12:18

Можно просто он откроет той програмой которая взяла на себя "зобовязаня"

ShellExecute(Handle, "open", "c:\\myprog\\debug\\1.bat", NULL, NULL, SW_SHOWNORMAL);

если нада то можеш задать параметер LPCTSTR lpDirectory мне иногда было нужна..

незабуть подключить shellapi.h

@cyberkest · 14.06.2008, 12:25 **[ТС]**

тут нашел люботный факт если эти команды запускать просто кнокой какой нить из проги то всё пашет, а вто если запускать в рамках например opendialog то не пашет
с чем это может быть связано?:huh: (мне кажется, что какие-то пути нарушаются!)

Привожу код:

C++
1
2
3
4
5
6
7
8
9
10
11
12
13
void __fastcall TMainForm::FileOpen1Execute(TObject *Sender)
{
    if (OpenDialog->Execute()){
    MyFName= OpenDialog->FileName;
    ShowMessage("222");
    char* xx;
    xx = MyFName.c_str();
    CopyFile(xx, "c:\\myprog\\debug\\xxx.xxx",1);
    DeleteFile("c:\\myprog\\debug\\xxx.dat");
    ShowMessage("333");
    ShellExecute(Handle, "open", "1.bat", NULL, NULL, SW_HIDE);
    };
}

@mikityak · 14.06.2008, 12:32

) Ну во первых на какой те Handle указывать, во вторых зачем етот 1.bat
можно уже тут тупо все задать то што в нем 7za.exe e -y tmp.7z в параметре
LPCTSTR lpParameters ну и втретих те нада всетаки указать полный путь к нему ибо Borland рулит....

Добавлено через 45 секунд
SW_HIDE - :eek: каво ты там прятать собралса ?

@cyberkest · 14.06.2008, 12:43 **[ТС]**

Сообщение от mikityak

) Ну во первых на какой те Handle указывать, во вторых зачем етот 1.bat
можно уже тут тупо все задать то што в нем 7za.exe e -y tmp.7z в параметре
LPCTSTR lpParameters ну и втретих те нада всетаки указать полный путь к нему ибо Borland рулит....

Добавлено через 45 секунд
SW_HIDE - :eek: каво ты там прятать собралса ?

Ну да батник здесь не в кассу просто тестю на нем. По результатам кода выдает сообщение "0".

Привожу код:

C++
1
2
3
4
5
6
7
8
9
10
11
12
void __fastcall TMainForm::FileOpen1Execute(TObject *Sender)
{
    if (OpenDialog->Execute()){
    MyFName= OpenDialog->FileName;
char* xx;
    xx = MyFName.c_str();
    CopyFile(xx, "c:\\myprog\\debug\\xxx.xxx",1);
    DeleteFile("c:\\myprog\\debug\\xxx.dat");
ShellExecute(NULL, "open", "c:\\myprog\\debug\\1.bat", NULL, NULL, SW_HIDE);
ShowMessage(IntToStr(GetLastError()));
    };
}

Даже указав полный путь нифига он его не запускает. что за фигня?

@mikityak · 14.06.2008, 14:27

Та запускай ти сразу 7za.exe со своими параметрами...

@cyberkest · 14.06.2008, 14:29 **[ТС]**

А разве не пофиг что запускать?!

@mikityak · 14.06.2008, 15:23

Раз у тебя не получаетса такая фигня значит не пофиг

) и зачем смотреть на тупое окно консоли, лутше уже делать так штобы програма знала когда Архиватор закончил работать...

C++
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
// ExtArchiv.cpp : Defines the entry point for the application.
//
 
#include "Stdafx.h"
#include "Searching.h"
#include "SearthRar.h"
#include "ExtMessage.h"
#include "res\\Resource.h"
 
#define MAX_LOADSTRING 100
 
char szCommandLine[MAX_PATH];
char szPaw[MAX_LOADSTRING];
 
int APIENTRY ExtArchiv(HINSTANCE hInstance)
{
    STARTUPINFO start_info;
 
    ZeroMemory( & start_info , sizeof( start_info) );
    start_info.cb = sizeof(start_info);
 
    PROCESS_INFORMATION proc_info;
 
    ZeroMemory( & proc_info , sizeof( proc_info ) );
    
    strcat(lpData, " x "); //дополняем командную строку где "x" -извлечь файлы из архива с полными путями
    LoadString(hInstance, IDS_STRING_PAW, szPaw, MAX_LOADSTRING);
 
    do
    {
        NumFiles --;
        strcpy(szCommandLine, lpData);
        strcat(szCommandLine, szPaw); //add "
        strcat(szCommandLine, szFileArray[NumFiles]);
        strcat(szCommandLine, szPaw); //add "
        strcat(szCommandLine, " *.* ");
 
        strcat(szCommandLine, szPaw); //add "
        strncat(szCommandLine, szFileArray[NumFiles], strlen(szFileArray[NumFiles]) - 4);
        strcat(szCommandLine, "\\");
        strcat(szCommandLine, szPaw); //add "
 
        if(!CreateProcess(NULL, szCommandLine, NULL, NULL, FALSE, 0, NULL, NULL, &start_info, &proc_info))
        {
            ExtMessage(GetLastError(), "", MB_OK | MB_ICONHAND);
            return FALSE;
        }
 
        WaitForSingleObject(proc_info.hProcess, INFINITE);
        CloseHandle(proc_info.hProcess);
    }
    while (NumFiles != 0); 
 
    return TRUE;
}

Extract Archive.zip

Новые блоги и статьи Все статьи Все блоги /
Автоматическое создание документа при проведении другого документа Maks 29.03.2026 Реализация из решения ниже выполнена на нетиповых документах, разработанных в конфигурации КА2. Есть нетиповой документ "ЗаявкаНаРемонтСпецтехники" и нетиповой документ "ПланированиеСпецтехники". В. . .	Настройка движения справочника по регистру сведений Maks 29.03.2026 Решение ниже реализовано на примере нетипового справочника "ТарифыМобильнойСвязи" разработанного в конфигурации КА2, с целью учета корпоративной мобильной связи в коммерческом предприятии. . . .	Автозаполнение реквизита при выборе элемента справочника Maks 27.03.2026 Программный код из решения ниже на примере нетипового документа "ЗаявкаНаРемонтСпецтехники" разработанного в конфигурации КА2. При выборе "Спецтехники" (Тип Справочник. Спецтехника), заполняется. . .	Сумматор с применением элементов трёх состояний. Hrethgir 26.03.2026 Тут. https:/ / fips. ru/ EGD/ ab3c85c8-836d-4866-871b-c2f0c5d77fbc Первый документ красиво выглядит, но без схемы. Это конечно не даёт никаких плюсов автору, но тем не менее. . . всё может быть. . .
Автозаполнение реквизитов при создании документа Maks 26.03.2026 Программный код из решения ниже размещается в модуле объекта документа, в процедуре "ПриСозданииНаСервере". Алгоритм проверки заполнения реализован для исключения перезаписи значения реквизита,. . .	Команды формы и диалоговое окно Maks 26.03.2026 1. Команда формы "ЗаполнитьЗапчасти". Программный код из решения ниже на примере нетипового документа "ЗаявкаНаРемонтСпецтехники" разработанного в конфигурации КА2. В качестве источника данных. . .	Кому нужен AOT? DevAlt 26.03.2026 Решил сделать простой ланчер Написал заготовку: dotnet new console --aot -o UrlHandler var items = args. Split(":"); var tag = items; var id = items; var executable = args;. . .	Отправка уведомления на почту при создании или изменении элементов справочника Maks 24.03.2026 Программная отправка письма электронной почты на примере типового справочника "Склады" в конфигурации БП3. Перед реализацией необходимо выполнить настройку системной учетной записи электронной. . .

@cyberkest 0 / 0 / 0 Регистрация: 05.05.2008 Сообщений: 21

	WinExec 14.06.2008, 10:46. Показов 24728. Ответов 11 Метки нет (Все метки) Подкажите где я туплю "ShowMessage("333"); WinExec("c:\\myyprog\\debug\\1.bat",SW_S HOW);" Сообщение вижу, а вот файл 1.bat выполняется с ошибками(хотя если его просто запустить ручками из виндовс то всё нормально разархивируется). внутри 1.bat написано: @echo off 7za.exe e -y tmp.7z exit Я уже и так и так колдовал и пытался одной строкой просто запустить разархивацию в WinExec, а всё равно лагает! в чем может быть проблема? 0

@mikityak 617 / 22 / 0 Регистрация: 30.09.2007 Сообщений: 357
	14.06.2008, 11:15
	WinExec("C:\WINDOWS\system32\Cmd.exe c:\\myyprog\\debug\\1.bat",SW_SHOW);" ) юзай ShellExecute 0

@mikityak 617 / 22 / 0 Регистрация: 30.09.2007 Сообщений: 357
	14.06.2008, 11:37
	ShellExecute Function -------------------------------------------------------------------------------- Performs an operation on a specified file. Syntax HINSTANCE ShellExecute( HWND hwnd, LPCTSTR lpOperation, LPCTSTR lpFile, LPCTSTR lpParameters, LPCTSTR lpDirectory, INT nShowCmd ); Parameters hwnd [in] Handle to the owner window used for displaying a user interface (UI) or error messages. This value can be NULL if the operation is not associated with a window. lpOperation [in] Pointer to a null-terminated string, referred to in this case as a verb, that specifies the action to be performed. The set of available verbs depends on the particular file or folder. Generally, the actions available from an object's shortcut menu are available verbs. For more information about verbs and their availability, see Object Verbs. See Extending Shortcut Menus for further discussion of shortcut menus. The following verbs are commonly used. edit Launches an editor and opens the document for editing. If lpFile is not a document file, the function will fail. explore Explores the folder specified by lpFile. find Initiates a search starting from the specified directory. open Opens the file specified by the lpFile parameter. The file can be an executable file, a document file, or a folder. print Prints the document file specified by lpFile. If lpFile is not a document file, the function will fail. NULL For systems prior to Microsoft Windows 2000, the default verb is used if it is valid and available in the registry. If not, the "open" verb is used. For Windows 2000 and later systems, the default verb is used if available. If not, the "open" verb is used. If neither verb is available, the system uses the first verb listed in the registry. lpFile [in] Pointer to a null-terminated string that specifies the file or object on which to execute the specified verb. To specify a Shell namespace object, pass the fully qualified parse name. Note that not all verbs are supported on all objects. For example, not all document types support the "print" verb. lpParameters [in] If the lpFile parameter specifies an executable file, lpParameters is a pointer to a null-terminated string that specifies the parameters to be passed to the application. The format of this string is determined by the verb that is to be invoked. If lpFile specifies a document file, lpParameters should be NULL. lpDirectory [in] Pointer to a null-terminated string that specifies the default directory. nShowCmd [in] Flags that specify how an application is to be displayed when it is opened. If lpFile specifies a document file, the flag is simply passed to the associated application. It is up to the application to decide how to handle it. SW_HIDE Hides the window and activates another window. SW_MAXIMIZE Maximizes the specified window. SW_MINIMIZE Minimizes the specified window and activates the next top-level window in the z-order. SW_RESTORE Activates and displays the window. If the window is minimized or maximized, Windows restores it to its original size and position. An application should specify this flag when restoring a minimized window. SW_SHOW Activates the window and displays it in its current size and position. SW_SHOWDEFAULT Sets the show state based on the SW_ flag specified in the STARTUPINFO structure passed to the CreateProcess function by the program that started the application. An application should call ShowWindow with this flag to set the initial show state of its main window. SW_SHOWMAXIMIZED Activates the window and displays it as a maximized window. SW_SHOWMINIMIZED Activates the window and displays it as a minimized window. SW_SHOWMINNOACTIVE Displays the window as a minimized window. The active window remains active. SW_SHOWNA Displays the window in its current state. The active window remains active. SW_SHOWNOACTIVATE Displays a window in its most recent size and position. The active window remains active. SW_SHOWNORMAL Activates and displays a window. If the window is minimized or maximized, Windows restores it to its original size and position. An application should specify this flag when displaying the window for the first time. Return Value Returns a value greater than 32 if successful, or an error value that is less than or equal to 32 otherwise. The following table lists the error values. The return value is cast as an HINSTANCE for backward compatibility with 16-bit Windows applications. It is not a true HINSTANCE, however. The only thing that can be done with the returned HINSTANCE is to cast it to an int and compare it with the value 32 or one of the error codes below. 0 The operating system is out of memory or resources. ERROR_FILE_NOT_FOUND The specified file was not found. ERROR_PATH_NOT_FOUND The specified path was not found. ERROR_BAD_FORMAT The .exe file is invalid (non-Microsoft Win32 .exe or error in .exe image). SE_ERR_ACCESSDENIED The operating system denied access to the specified file. SE_ERR_ASSOCINCOMPLETE The file name association is incomplete or invalid. SE_ERR_DDEBUSY The Dynamic Data Exchange (DDE) transaction could not be completed because other DDE transactions were being processed. SE_ERR_DDEFAIL The DDE transaction failed. SE_ERR_DDETIMEOUT The DDE transaction could not be completed because the request timed out. SE_ERR_DLLNOTFOUND The specified dynamic-link library (DLL) was not found. SE_ERR_FNF The specified file was not found. SE_ERR_NOASSOC There is no application associated with the given file name extension. This error will also be returned if you attempt to print a file that is not printable. SE_ERR_OOM There was not enough memory to complete the operation. SE_ERR_PNF The specified path was not found. SE_ERR_SHARE A sharing violation occurred. Remarks This method allows you to execute any commands in a folder's shortcut menu or stored in the registry. To open a folder, use either of the following calls: ShellExecute(handle, NULL, <fully_qualified_path_to_folder>, NULL, NULL, SW_SHOWNORMAL); or ShellExecute(handle, "open", <fully_qualified_path_to_folder>, NULL, NULL, SW_SHOWNORMAL); To explore a folder, use: ShellExecute(handle, "explore", <fully_qualified_path_to_folder>, NULL, NULL, SW_SHOWNORMAL); To launch the Shell's Find utility for a directory, use: ShellExecute(handle, "find", <fully_qualified_path_to_folder>, NULL, NULL, 0); If lpOperation is NULL, the function opens the file specified by lpFile. If lpOperation is "open" or "explore", the function attempts to open or explore the folder. To obtain information about the application that is launched as a result of calling ShellExecute, use ShellExecuteEx. Note The Launch folder windows in a separate process setting in Folder Options affects ShellExecute. If that option is disabled (the default setting), ShellExecute uses an open Explorer window rather than launch a new one. If no Explorer window is open, ShellExecute launches a new one. Windows 95/98/Me: ShellExecute is supported by the Microsoft Layer for Unicode. To use this, you must add certain files to your application, as outlined in Microsoft Layer for Unicode on Windows 95/98/Me Systems. Function Information Minimum DLL Version shell32.dll version 3.51 or later Custom Implementation No Header shellapi.h Import library shell32.lib Minimum operating systems Windows NT 3.1, Windows 95 Unicode Implemented as ANSI and Unicode versions. See Also IShellExecuteHook -------------------------------------------------------------------------------- © 2005 Microsoft Corporation. All rights reserved. 1

@cyberkest 0 / 0 / 0 Регистрация: 05.05.2008 Сообщений: 21
	14.06.2008, 11:42 [ТС]
	Т.Е. вот так ?? ShellExecute(Handle, NULL, "C:\\WINDOWS\\system32\\Cmd.exe", "c:\\myprog\\debug\\1.bat", NULL, SW_RESTORE); 0

@mikityak 617 / 22 / 0 Регистрация: 30.09.2007 Сообщений: 357
	14.06.2008, 12:18
	Можно просто он откроет той програмой которая взяла на себя "зобовязаня" ShellExecute(Handle, "open", "c:\\myprog\\debug\\1.bat", NULL, NULL, SW_SHOWNORMAL); если нада то можеш задать параметер LPCTSTR lpDirectory мне иногда было нужна.. незабуть подключить shellapi.h 0

@mikityak 617 / 22 / 0 Регистрация: 30.09.2007 Сообщений: 357
	14.06.2008, 12:32
	) Ну во первых на какой те Handle указывать, во вторых зачем етот 1.bat можно уже тут тупо все задать то што в нем 7za.exe e -y tmp.7z в параметре LPCTSTR lpParameters ну и втретих те нада всетаки указать полный путь к нему ибо Borland рулит.... Добавлено через 45 секунд SW_HIDE - :eek: каво ты там прятать собралса ? 0

@mikityak 617 / 22 / 0 Регистрация: 30.09.2007 Сообщений: 357
	14.06.2008, 14:27
	Та запускай ти сразу 7za.exe со своими параметрами... 0

@cyberkest 0 / 0 / 0 Регистрация: 05.05.2008 Сообщений: 21
	14.06.2008, 14:29 [ТС]
	А разве не пофиг что запускать?! 0