rtc alarm на asus t100

standby – This is the default mode, if you didn’t mention the -m switch in your command. This state offers minimal, though real, power savings, while providing a very low-latency transition back to a working system.
freeze – In this mode, all processes are frozen, all the devices are suspended and all the processors idled.
mem – Suspend-to-RAM. In this state, everything will be put into low-power state, except memory to offer significant power savings. The contents of the RAM are retained.
disk – Suspend-to-disk. This state offers the greatest power savings. This state operates similarly to Suspend-to-RAM, but includes a final step of writing memory contents to disk.
off – It shuts down your pc completely. This is done by calling ‘/sbin/shutdown’. Not officially supported by ACPI, but it usually works.
no – Don’t suspend, only set the RTC wakeup time.
on – Don’t suspend, but read the RTC device until an alarm time appears. This mode is useful for debugging.
disable – Disable a previously set alarm.
show – Prints the alarm information in format: “alarm: off|on <time>”. e.g. “alarm: on Fri Apr 21 15:00:05 2017”.